Product Description
The seawater desalination system adopts the international advanced reverse osmosis technology and is designed by optimizing the system.
Applicable to cargo ships, oil tankers, offshore drilling platforms, islands, stations and coastal cities short of water.
The system can effectively remove inorganic salts, heavy metal ions, organic bacteria, bacteria and other harmful components in seawater, and desalinate seawater into high-quality water in accordance with the National drinking Water Sanitation Standard (GB5749-2022).
The whole system is equipped with advanced flow meter, pressure control instrument and safety pressure relief device, and is equipped with advanced detection and monitoring system to ensure stable operation of the system and high quality water production. When the water quality exceeds the warning salinity value, the system automatically opens and drains. Valves, which direct the production of water into the waste water line) and provide accurate values for the operation of the system.
Product Parameters
|
360TPD Seawater Desalination Equipment |
|
| Model | WY-SW-360 |
| Water yield | 360m3/day |
|
RO product water quality |
National Standard for Drinking Water(GB5749-2022) |
|
Desalination rate |
>99.5% |
| Output water saltness | <700mg/L |
|
Recovery rate |
45%(Depending on temperature and inlet water quality) |
| Operation pressure | <6.5Mpa |
|
Power |
42.5KW |
|
Voltage |
AC380V / 50Hz / Three phase |
|
Protection grade |
IP54 |
|
Dimensions |
40 feet container |
|
Net weight |
8500Kg |
|
Material composition |
SUS316 Stainless steel |
* 1. The amount of water produced refers to the amount of water produced under the conditions of an inlet water temperature of 25 ° C, a salt content of 35,000 mg/L, and an operating pressure of 5 MPa.
2. Equipment can be customized according to customer requirements.
System function
1. Automatic operation management with touch screen and PLC controller.
2. High-pressure unloading, when the high-pressure pump outlet pressure exceeds 6.2MPa, the equipment automatically stops and protects and emits an audible and visual alarm.
3. Low-pressure shutdown protection. When the pre-treatment water supply is insufficient and the high-pressure pump inlet pressure is lower than 0.05MPa, the protection action will be automatically stopped and an audible and visual alarm will be issued.
4. The pre-treatment is equipped with an automatic multi-way valve for automatic large-flow backwashing and full washing.
5. Configure the reverse osmosis membrane cleaning system to physically clean, chemically clean and refill the reverse osmosis membrane module.
6. The container is equipped with air conditioning to maintain a comfortable temperature.
Main accessories
● Feed Pump: SUS316, CNP/ GRUNDFOS brand
● Multimedia Filter: Ø1500x2100mm, FRP, 1pc
● Precision Filter: 40" x 5μm, FRP
● High Pressure Pump: SUS316, DIAMOND/ CNP brand
● Reverse Osmosis Membrane: 8040, 30pcs, USA DOW/ TORAY/ HYDRANAUTICS/ GE brand
● Membrane Housing: 8040, FRP, 5pcs, FirstLine brand
● Rinse Tank: 1000L
● CIP Chemical Cleaning Device: System matching
● Dosing System: MILTON ROY/ LIGAO
● Energy Rcovery Device: Optional
● Electric Element: Schneider brand or equivalent.
● Device Framework: Industry-standard thick-walled stainless steel tube, and pipe outer surface is polished.
● Pipeline: The high-pressure side pipeline adopts dualphase steel or stainless steel pipelines and high-pressure hoses. Low-pressure side pipe uses UPVC pipe.
Equipment list
1. Water treatment equipment
2. User manual, Operation video*
3. Final document (product certificate, factory test report, packing list, equipment drawing)
4. Other consumables accessories
Please contact us for more details.
Mobile: +86-13326682480
Wechat: 13798988771
Email: steve@zhwywater.com
Process flow diagram
Water inlet → Multi-media filter → Precision filter → High pressure pump → Reverse osmosis system→ Product water
Features and advantages
● High quality imported high pressure pump with high operating efficiency, low energy consumption, low noise and long service life.
● High-quality reverse osmosis membrane with a salt rejection rate of 99.5%, strong anti-pollution ability and stable water quality.
● Rack piping and fittings are made of stainless steel and corrosion-resistant materials to ensure long-lasting equipment and low maintenance costs.
● The operation is simple and easy to use, and the maintenance is convenient. As long as there is electricity, there is sea water, and fresh water can be supplied immediately after the pipeline is started.
● Energy saving design, low energy consumption and low cost of water production.
● Wide range of power supply: 220V~440V/50~60HZ.
● RO product water quality standard: in line with national drinking water standard <GB5749-2022>.
● Long service life: 15-20 years, rigorous process design to ensure long service life and low maintenance costs.
● The type of equipment combination can be realized: bracket type, armored type, brake type, container type, etc.
Recommended Products
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
Customer Cases
|
|
|
|
|
|
|
|
Reverse Osmosis Technology
The reverse osmosis membrane is an artificial semipermeable membrane made of a semi-permeable membrane that has certain characteristics and is a core component of reverse osmosis technology.
The principle of reverse osmosis technology is to remove these substances and moisture according to the osmotic pressure of the solution, according to the fact that other substances cannot pass through the semipermeable membrane. The membrane pore size of the reverse osmosis membrane is very small, so that dissolved salts, colloids, microorganisms, organic matter, and the like in the water can be effectively removed.
The system has the advantages of good water quality, low energy consumption, no pollution, simple process and easy operation.
Applicable field
 |
 |
 |
| Ship | Island | Industrial process water |
 |
 |
 |
| Offshore working platform | Coastal water shortage area | Desert area |
Raw Water Quality：
TDS: ≦35000mg/L
Inlet Temperature: 5~45℃
Inlet Flow：33.3m3/h
Product Water Quality：
TDS: <700mg/L(City tap water standard)
Desalination Rate: ≧99.5%
Operating Pressure：<6.5MPa
Power：
Voltage：220V / 380V /440V，50~60HZ，Three-phase
Protection Grade：IP54
Specifiactions:
|
Model |
Water yield |
Power |
Recovery rate |
Dimensions |
|
m3/d |
KW |
% |
mm |
|
|
WY-SW-360 |
360 | 45.5 | 45 |
40 feet container |
Equipment can be made according to customer’s requirements, only standard models are shown in the form.
Please contact us for more details.
Email: steve@zhwywater.com, wy@zhwywater.com
Tel:+86-756-8930698
Mobile:+86-13326682480
