Containerized Seawater Desalination System

 Tip: Click on image to enlarge

Containerized Seawater Desalination System

The containerized seawater desalination equipment adopts the international advanced reverse osmosis technology. From the seawater water inlet system, coarse filtration and lower seawater turbidity are started. Then, a special high pressure booster pump is used, seawater enters the reverse osmosis membrane, and the seawater treated by the reverse osmosis membrane contains The amount of salt is greatly reduced, the water is produced into the pure water tank, and the water quality meets the requirements of domestic water use (national sanitary standard for drinking water (GB5749-2022)).






The desalination system adopts reverse osmosis water treatment technology, and has been well received by many customers after many years of practical application.

The desalination equipment is mainly treated with domestic drinking water from boats, ships, offshore platforms and islands. The treated water can meet the national drinking water standards, and can be treated again to meet the national pure water standards.


Specifiactions:

Model
Water yield
Power
Recovery rate
Dimensions
m3/d
KW
%
Container
WY-SW-72
72 20 40 20 Feet
WY-SW-120
120 34 40 20 Feet
WY-SW-240
240 34 45 40 Feet
WY-SW-360
360 42.5 45 40 Feet
WY-SW-720
720 85 45 40 Feet*2
WY-SW-1000
1000
108.5 45 40 Feet*2
WY-SW-2000
2000
193 45 40 Feet*4
WY-SW-5000
5000
597 45 40 Feet*10
WY-SW-10000
10000 965 45 40 Feet*20

Equipment can be made according to customer’s requirements, only standard models are shown in the form.


Raw Water Quality

TDS: ≦40000mg/L

Inlet Temperature: 5~45℃


Product Water Quality

TDS: <700mg/L (City tap water standard)

Desalination Rate: ≧99.5%

Operating Pressure: <6.5MPa


Power

Voltage: 220V / 380V /440V, 50~60HZ, Three-phase

Protection Levels: IP54



Please contact us for more details.


Mobile: +86-13326682480

Wechat: 13798988771

Email: steve@zhwywater.com


Process flow diagram

Water inlet → Multi-media filter → Precision filter → High pressure pump → Reverse osmosis system → Product water



Configuration

● RO Membrane: USA DOW / TORAY / HYDRANAUTICS.

● Pressure Vessel: Firstline, FRP Material.

● Raw Water Booster Pump: Grundfos / CNP.

● High Pressure Pump: CAT / Diamond / CNP.

● Device Framework: Industry-standard thick-walled stainless steel tube, and pipe outer surface is polished.

● Pipeline: The high-pressure side pipeline adopts dualphase steel or stainless steel pipelines and high-pressure hoses. Low-pressure side pipe uses UPVC pipe.

● Electric Element: Schneider.

● Container size: 20 feet, 40 feet.

● Energy recovery device can be used to reduce energy consumption.


Water quality

First-stage RO water quality: National Standard for Drinking Water (GB5749-2022).

Second-stage RO water quality: Pure water standard.


Performance and features

● Reverse osmosis seawater desalination technology is mature and advanced, the desalination rate is up to 99.5%.

● Using automatic control technology to achieve automatic management, reduce labor intensity and management costs.

● Energy saving design, low energy consumption and low cost of water production.

● Rigorous process design ensures long system life and low maintenance costs.

● Reliability: 24-hour continuous operation.

● Easy to operated and maintained, cleaned and repaired without disassembly, easy to managed.

● Customizable according to customers’needs.


Recommended Products




20TPD Two-stage RO 

Seawater Desalination Equipment

72TPD 

Seawater Desalination Equipment

144TPD 

Seawater Desalination Equipment




200TPD 

Seawater Desalination Equipment

360TPD 

Seawater Desalination Equipment

1200TPD 

Seawater Desalination Equipment


Customer Cases

For fishing boats

Small desalination machine

Offshore work platform

RO fresh water generator

Shipyard

Seawater desalination unit


Philippine Islands

Seawater desalination equipment

Aquiculture

Container seawater desalination system

Sea sand desalination

Modular seawater desalination equipment


Reverse Osmosis Technology

The reverse osmosis membrane is an artificial semipermeable membrane made of a semi-permeable membrane that has certain characteristics and is a core component of reverse osmosis technology.

The principle of reverse osmosis technology is to remove these substances and moisture according to the osmotic pressure of the solution, according to the fact that other substances cannot pass through the semipermeable membrane. The membrane pore size of the reverse osmosis membrane is very small, so that dissolved salts, colloids, microorganisms, organic matter, and the like in the water can be effectively removed.

The system has the advantages of good water quality, low energy consumption, no pollution, simple process and easy operation.



Applicable field




Ship Island Industrial process water



Offshore working platform Coastal water shortage area Desert area


Raw Water Quality

TDS: ≦40000mg/L

Inlet Temperature: 5~45℃


Product Water Quality

TDS: <700mg/L (City tap water standard)

Desalination Rate: ≧99.5%

Operating Pressure: <6.5MPa


Power

Voltage: 220V / 380V /440V, 50~60HZ, Three-phase

Protection Levels: IP54


Specifiactions:

Model
Water yield
Power
Recovery rate
Dimensions
m3/d
KW
%
Container
WY-SW-72
72 20 40 20 Feet
WY-SW-120
120 34 40 20 Feet
WY-SW-240
240 34 45 40 Feet
WY-SW-360
360 42.5 45 40 Feet
WY-SW-720
720 85 45 40 Feet*2
WY-SW-1000
1000
108.5 45 40 Feet*2
WY-SW-2000
2000
193 45 40 Feet*4
WY-SW-5000
5000
597 45 40 Feet*10
WY-SW-10000
10000 965 45 40 Feet*20


Equipment can be made according to customer’s requirements, only standard models are shown in the form.


Please contact us for more details.

Email: steve@zhwywater.com, wy@zhwywater.com

Tel:+86-756-8930698

Mobile:+86-13326682480